The Miracle-Gro Garden Feeder is a popular hose end attachment that makes fertilizing your outdoor plants easy and convenient. With its easy hookup to your garden hose, you can quickly feed your flowers, vegetables, trees, shrubs and more. This handy tool takes the measuring and mixing out of feeding your plants. If you’ve purchased a Miracle-Gro Garden Feeder but aren’t quite sure how to use it, this guide will walk you through the complete instructions.
How the Miracle-Gro Garden Feeder Works
Miracle-Gro Garden Feeder is a big jar that you fill with Miracle-Gro plant food that dissolves in water. It attaches to your hose via a threaded connector. The jar fills up with water and plant food when the water is turned on. With a squeeze of the trigger, you then spray the fertilizer solution right on the plants. With the Garden Feeder, you can feed up to 500 square feet of garden at once.
If you want to cover a certain area, the jar’s fill lines will tell you how much plant food to add. You can also choose from three spray patterns—shower, jet, and flat—so you can water your plants in a way that suits their needs. You don’t have to guess how much fertilizer to mix or measure with the Garden Feeder.
Step-By-Step Instructions
Using the Miracle-Gro Garden Feeder is simple if you follow these steps
1. Fill the Jar with Plant Food
First, put plant food in the jar. Unscrew the jar from the sprayer unit. Check out the fill lines inside the jar. They are marked for 100, 300, and 500 square feet of coverage. Add the right amount of Miracle-Gro water-soluble plant food to cover the area you want to cover. You can use any Miracle-Gro water soluble fertilizer. Screw the lid back on tightly.
2. Connect the Garden Feeder to Your Hose
The easy-turn connector lets you connect the Garden Feeder to your outdoor hose. Make sure the connection is tight so it doesn’t leak.
3. Turn on the Water and Allow the Jar to Fill
Turn on your hose to a medium or high setting. Water will flow into the jar and start mixing with the plant food inside. Allow the jar to fill completely before spraying your plants.
4. Start Spraying Your Plants
Once the jar is full, you’re ready to begin fertilizing your plants. Aim the nozzle at your plants and squeeze the trigger. You can select the shower, jet or flat spray pattern. Water your plants until the jar is empty, which takes about 10-12 minutes to cover 500 sq ft.
5. Rinse Out the Garden Feeder
When finished, turn off the water and disconnect the Garden Feeder from the hose. Turn it upside down and unscrew the jar about one turn. Turn the water back on to rinse out any remaining plant food residues inside the jar. Rinse thoroughly.
Tips for Using the Miracle-Gro Garden Feeder
Follow these tips to get the most out of your Garden Feeder:
-
Read the instructions on the plant food package to determine the correct amount to add to the jar. Never exceed recommended rates.
-
When filling the jar, don’t pack down the plant food. The granules need room to dissolve and mix.
-
Shake the jar gently before connecting to your hose to help dissolve any chunks.
-
Don’t begin spraying until the jar completely fills with water. This ensures thorough mixing.
-
Point the nozzle at the base of plants and soil to get good coverage.
-
Water slowly, allowing the fertilizer to absorb into the soil and roots.
-
Feed plants every 1-2 weeks for best growth and blooms.
-
Rinse the Garden Feeder after each use to prevent clogs.
Troubleshooting Issues
The Miracle-Gro Garden Feeder is designed to be easy to use, but occasional issues can arise:
Clogging: If the sprayer starts sputtering, the tip is likely clogged. Turn off water and use a pin to clear any blockages. Make sure to rinse thoroughly after each use.
Leaking: Check that the jar is screwed on tightly before turning on water. Make sure all o-rings are in place to prevent leaking. Tighten the hose connection.
Uneven Coverage: The plant food may be overpacked or needs more mixing time. Allow the jar to fill completely and shake it more before spraying.
Too Strong Solution: Don’t overfill the jar. Start with a weaker solution and gradually increase strength as plants tolerate it.
Tip Not Adjusting: The sprayer may be stuck. Try spraying water only to loosen it. Use lubricant if needed.
Get the Most from Your Miracle-Gro Garden Feeder
When used properly, the Miracle-Gro Garden Feeder takes the hassle out of fertilizing your outdoor plants. Follow the package instructions and these tips to enjoy healthy, thriving gardens and container plants. With its handy hose connection and pre-measured jar, you’ll find fertilizing is now simple and quick. The Garden Feeder helps your plants get a nourishing drink of Miracle-Gro with just the squeeze of a trigger.
Does Cutting Branches Kill a Tree? A Guide to Proper Pruning Techniques